C2g 39969 TruLink KVM Extender Manual de usuario descargar pdf (Pagina 6)

3. Connect the Receiver to a PS/2 KVM console as illustrated below in Figure 4.

4. Connect the supplied 5VDC Power adapter to the Receiver. The Transmitter receives its power

from the connected computer.

LED indicators

Both the Transmitter and Receiver have 2 LEDs above the RJ45 port. The green LED indicates

power is on. The flashing yellow LED indicates the system is connected.

Picture adjuster

To get a clear projected image, use a screwdriver to turn the picture adjuster on the Receiver unit

Operating the KVM Extender:

Configuration options

Figure 4. Receiver connections

Configure the KVM Extender system to:

• Work with Unix servers

• Input the monitor’s DDC information

• Change the Shift hotkey to Ctrl

When you enter the configuration mode by pressing, Shift, Tab, as set out below, all 3 LEDs

illuminate. Pressing Esc exits the configuration mode and the LEDs return to normal.

Note: Press the keys one after the other not all together.

Working with UNIX servers

Configure the system to work with UNIX servers

• For HP UX, SGI and Open VMS, press Shift, Tab, U, 1, Esc

• For Alpha Unix, press Shift, Tab, U, 2, Esc

1 2 3 4 5 6 7 8

Sin comentarios

C2g 39969 TruLink KVM Extender Manual de usuario Pagina 6